School of Engineering, Materials Science & Engineering

Research output

Research output per year 1970 1992 1994 1995 1996 1997 1998 1999 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2023

• 105633 Citations
• 133 h-index
• 1490 Article
• 298 Conference contribution
• 171 Conference article
• 82 Paper
• 143 More
  • 39 Review article
  • 35 Chapter
  • 22 Comment/debate
  • 19 Editorial
  • 13 innovation
  • 8 Letter
  • 3 Book
  • 3 Foreword/postscript
  • 1 Short survey

Research output per year

Research output per year

Search results

• 2018

  High shear melt-processing of polyetheretherketone enhanced polysulfone immiscible polymer blends

  Tewatia, A., Hendrix, J., Nosker, T. & Lynch, J., Jan 1 2018.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Polysulfones 100%
  • Polymer blends 92%
  • Polyether ether ketones 90%
  • Shear 59%
  • Rheology 58%
• 2017

  Integrating THz quantum cascade lasers to flexible dielectric-metallic waveguides: Moving beyond free space optics

  Beere, H. E., Wallis, R., Degl'Innocenti, R., Jessop, D. S., Ren, Y., Mitrofanov, O., Bledt, C. M., Melzer, J. E. & Ritchie, D. A., 2017.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review
• 2014

  Composition dependence on the mechanical behavior of hydrophobic lignocellulose-reinforced poly (trimethylene) terephthalate composites

  Lynch, J., Nosker, T. & Tewatia, A., 2014, p. 551-555. 5 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Thermoplastics 100%
  • Moisture 86%
  • Chemical analysis 64%
  • Dimensional stability 62%
  • Natural fibers 61%

• Synthesis and processing of enhanced boron carbide by rapid carbothermal reduction

  Munhollon, T., Toksoy, M. F., Kuwelkar, K., Rafaniello, W. & Haber, R., 2014.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Carbothermal reduction 100%
  • Boron carbide 93%
  • Carbothermal Reduction 78%
  • Boron Atom 55%
  • Powders 52%
• 2013

  Electromechanical properties of acceptor-doped lead-free piezoelectrics

  Taghaddos, E., Hejazi, M. & Safari, A., 2013, p. 66-68. 3 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Doping (additives) 100%
  • Lead 83%
  • Permittivity 44%
  • Oxides 38%
  • Temperature 17%

• Fabrication of bismuth ferrite nanofibers via electrospinning

  Rivera, R. & Safari, A., 2013, p. 156-158. 3 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Electrospinning 100%
  • Bismuth 99%
  • Nanofibers 96%
  • Multiferroics 88%
  • Ferrite 72%
  1 Scopus citations

• Multiferroic bismuth ferrite based thin films

  Yesner, G. & Safari, A., 2013, p. 122-123. 2 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Multiferroics 100%
  • Bismuth 74%
  • Ferrite 54%
  • Thin films 52%
  • Sol-gel process 37%
• 2010

  New non-fluoro process aid additives formulations for PC and PP

  Sharma, A. H., Schild, H. & Lynch, J. K., 2010.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Polycarbonates 100%
  • Polypropylenes 82%
  • Poly(propylene) 69%
  • Additive 55%
  • Melt Flow Index 39%
• 2008

  Advanced FeF3 cathode enabled lithium-ion battery

  Johnson, Z., Cordova, S. & Amatucci, G., Dec 1 2008.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • lithium 100%
  • Lithium-ion batteries 99%
  • battery 94%
  • Cathodes 92%
  • Fluoride 75%
• 2006

  Advanced bipolar lithium ion battery

  Johnson, Z., Cordova, S. & Amatucci, G., Dec 1 2006.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Lithium 100%
  • lithium 97%
  • Lithium-ion batteries 97%
  • battery 91%
  • Ions 83%
  1 Scopus citations

• Production of biofibers by laser spinning

  Quintero, F., Pou, J., Lusquiños, F., Riveiro, A. & Mann, A. B., 2006.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Plate Glass 100%
  • Glass 94%
  • glass 90%
  • Lasers 89%
  • laser 89%

• Recycling of latex based paint as polymer feedstock materials

  Lynch, J. K., Nosker, T., Hamill, R. & Lehman, R. L., 2006, p. 1450-1454. 5 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Latexes 100%
  • Paint 86%
  • Feedstocks 79%
  • Recycling 77%
  • Thermoanalysis 67%

• The effect of biaxial orientation processing conditions on immiscible polymer blended sheet

  Lynch, J. K., Nosker, T. & Idol, J. D., 2006, p. 2626-2630. 5 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • High density polyethylenes 100%
  • Extrusion 82%
  • Thermodynamic properties 78%
  • Membranes 71%
  • Polymers 61%
• 2005

  Dielectric properties of (Ba _0.60, Sr _0.40)TiO ₃ thin films on NdGaO ₃ substrates at 10 GHz

  Simon, W. K., Akdogan, E. K., Bellotti, J. & Safari, A., 2005, p. 47-50. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Dielectric properties 100%
  • Permittivity 91%
  • Dielectric Property 82%
  • Thin films 77%
  • Dielectric Response 58%

• Direct-write of PZT thick films

  Allahverdi, M. & Safari, A., 2005, p. 250-253. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Thick films 100%
  • Lead zirconate titanate 99%
  • Bismuth 54%
  • Lithium 45%
  • Permittivity 41%
  3 Scopus citations

• Effect of shear rate and mixer residence times on morphology development and correlation to Young's modulus in PS/PP blends approaching co-continuity

  Joshi, J., Lehman, R. L. & Nosker, T. J., 2005, p. 34-38. 5 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Young's Modulus 100%
  • Residence Time 98%
  • Shear deformation 94%
  • Shear 86%
  • Flexural Modulus 40%

• Glass transition effects in immiscible polymer blends

  Thirtha, V., Lehman, R. & Nosker, T., 2005, p. 303-307. 5 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Polymer blends 100%
  • Glass transition 80%
  • Glass Transition 75%
  • Poly(propylene) 59%
  • Glass Transition Temperature 59%
  3 Scopus citations

• Hydrothermal growth of epitaxial PZT

  Rossetti, G. A., Pinceloup, P., Oledzka, M., Suchanek, W., Mikulka-Bolen, K., Lencka, M. M., Emre, M., Lee, T., Zhu, C., Dave, R., McCandlish, L. E. & Riman, R. E., Dec 13 2005, p. 181-189. 9 p.

  New Jersey Institute of Technology, Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Epitaxial growth 100%
  • Lead zirconate titanate 86%
  • Crystallization 51%
  • Crystals 47%
  • Strontium titanates 44%

• Lead-free piezoelectric ceramic in the system of Bi _1/2Na _1/2TiO ₃-Bi _1/2K _1/2TiO ₃-BaTiO ₃ (BiNT-BiKT-BT)

  Hagh, N. M., Allahverdi, M. & Safari, A., 2005, p. 246-249. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Piezoelectric Coefficient 100%
  • Antiferroelectricity 90%
  • Piezoelectric ceramics 87%
  • Curie Temperature 76%
  • Lead 58%
  1 Scopus citations

• Paraelectric (Ba_0.6Sr_0.4)TiO₃ thick films by direct-write

  Kunduraci, M., Simon, W. K., Akdogan, E. K. & Safari, A., 2005, p. 21-24. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Thick films 100%
  • Superconducting transition temperature 88%
  • Dielectric properties 49%
  • Film thickness 44%
  • Alumina 40%
  3 Scopus citations

• SOL-GEL processed multilayer thin film design for solid oxide fuel cell applications

  Chandran, R., Finch, J. & Klein, L., 2005, p. 440-450. 11 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Multilayer films 100%
  • Solid oxide fuel cells (SOFC) 71%
  • Yttria stabilized zirconia 66%
  • Thin films 62%
  • Solid electrolytes 46%

• Templated grain growth (TGG) of PMN-PT textured components using SrTiO ₃ templates

  Brennan, R. E., Allahverdi, M. & Safari, A., 2005, p. 270-273. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Grain growth 100%
  • Grain Growth 98%
  • Heat treatment 69%
  • Heat Treatment 67%
  • Seed 55%
  3 Scopus citations
• 2004

  Creep prediction using the non-linear strain energy equivalence theory

  Lynch, J. K., Van Ness, K., Nosker, T. & Renfree, R. W., 2004, p. 1927-1931. 5 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Strain Energy 100%
  • Creep 96%
  • Strain energy 84%
  • Creep Behavior 79%
  • Strain rate 72%
  4 Scopus citations
• 2002

  Fabrication of advanced functional electroceramic components by Layered Manufacturing (LM) methods

  Safari, A., Cesarano, J., Clem, P. G. & Bender, B., 2002, p. 1-6. 6 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Layered manufacturing 100%
  • Ceramic 52%
  • Fabrication 50%
  • Actuators 30%
  • Laser Cutting 23%
  8 Scopus citations

• Growth of net-shape PMN-PT single crystal components by Fused Deposition of Ceramics (FDC) and templated grain growth (TGG) techniques

  Brennan, R. E., Allahverdi, M., Ebrahimi, M. E. & Safari, A., 2002, p. 435-438. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Grain growth 100%
  • Grain Growth 98%
  • Single crystals 92%
  • Ceramic 61%
  • Single Crystalline Solid 57%
  1 Scopus citations

• Novel piezoelectric ceramic/polymer composite transducers

  Turcu, S., Jadidian, B., Danforth, S. C. & Safari, A., 2002, p. 307-310. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Piezoelectric ceramics 100%
  • Transducers 68%
  • Ceramic 55%
  • Layered manufacturing 53%
  • Polymers 52%

• Synthesis of platelet SrTiO₃ by epitaxial growth on Sr₃Ti₂O₇ core particles

  Ebrahimi, M. E., Allahverdi, M. & Safari, A., 2002, p. 239-242. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Epitaxial growth 100%
  • Platelets 91%
  • Epitaxial Growth 86%
  • Seed 55%
  • Single Crystalline Solid 50%
  1 Scopus citations
• 2001

  Field emission vacuum power switch using vertically aligned carbon nanotubes

  Rupesinghe, N. L., Teo, K. B. K. & Amaratunga, G. A. J., 2001, p. 3-4. 2 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • field emission 100%
  • carbon nanotubes 94%
  • switches 90%
  • test vehicles 84%
  • triodes 69%
  3 Scopus citations
• 2000

  Electromechanical properties of piezoelectric spiral actuators

  Mohammadi, F., Jadidian, B., Kholkin, A. L., Danforth, S. C. & Safari, A., 2000, p. 101-104. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Displacement 100%
  • Ceramic 93%
  • Actuators 92%
  • Force 83%
  • Length 72%
  1 Scopus citations

• Extrinsic loss mechanisms in BST for tunable RF/microwave passive components

  Akdoĝan, E. K., Bellotti, J. & Safari, A., 2000, p. 191-194. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Permittivity 100%
  • Microwaves 79%
  • Microwave 73%
  • Dielectric Property 45%
  • Grain Size 42%
  10 Scopus citations

• Particle-shape control of molten salt synthesized lead titanate

  Ito, Y., Jadidian, B., Allahverdi, M. & Safari, A., 2000, p. 389-392. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Lead titanate 100%
  • Molten Salt 61%
  • Lithium Fluoride 60%
  • Molten materials 56%
  • Salts 53%
  2 Scopus citations

• Processing and properties of piezoelectric actuators developed by fused deposition technique

  Safari, A., Danforth, S. C., Jafari, M., Allahverdi, M., Jadidian, B. & Mohammadi, F., 2000, p. 79-82. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Piezoelectric actuators 100%
  • Deposition Technique 92%
  • Ceramic 64%
  • Filament 56%
  • Bellow 44%
  4 Scopus citations

• Properties of doped BaTi(Mn)O₃ + SiO₂ sintered in reducing atmospheres

  Spang, D. I., Safari, A. & Burn, I., 2000, p. 817-820. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Doping (additives) 100%
  • Doping Material 78%
  • Materials properties 37%
  • Powders 36%
  • Coatings 33%

• Size effects in nanophase PbTiO₃

  Akdoǧan, E. K. & Safari, A., 2000, p. 487-490. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Lead titanate 100%
  • Free energy 69%
  • Size Effect 65%
  • Point groups 46%
  • Gibbs Free Energy 43%
  2 Scopus citations

• Structural and dielectric characterization of SrTiO₃ and BST thin films for microwave applications

  Bellotti, J., Akdogan, E. K. & Safari, A., 2000, p. 867-870. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Thin films 100%
  • Dielectric Material 93%
  • Microwaves 93%
  • Characterization (materials science) 92%
  • Stoichiometry 71%
  1 Scopus citations
• 1998

  Design and fabrication of volume fraction gradient piezoelectric composites for medical imaging applications

  Panda, R. K., Kholkin, A. L. & Safari, A., 1998, p. 265-268. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Medical imaging 100%
  • Volume fraction 79%
  • Fabrication 65%
  • Layered manufacturing 64%
  • Transducers 62%
  2 Scopus citations

• Design for recyclability a recycling industry initiative

  Renfree, R. W. & Nosker, T. J., 1998, p. 2891-2895. 5 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Recycling 100%
  • Containers 94%
  • Adhesives 91%
  • Resins 91%
  • Label 89%

• Development of novel piezoelectric ceramics and composites for sensors and actuators by solid freeform fabrication

  Safari, A. & Danforth, S. C., 1998, p. 229-234. 6 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Layered manufacturing 100%
  • Piezoelectric ceramics 93%
  • Ceramic 52%
  • Actuators 51%
  • Composite materials 39%
  16 Scopus citations

• Development of tube actuators by Fused Deposition of Ceramics

  Umarji, A. M., Kholkin, A. L., McNulty, T. F., Danforth, S. C. & Safari, A., 1998, p. 269-272. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Lead zirconate titanate 100%
  • Piezoelectric Coefficient 64%
  • Ceramic 63%
  • Actuators 62%
  • Rapid prototyping 45%
  7 Scopus citations

• Dielectric and electromechanical properties of PbNi_1/3Nb_2/3O₃-PbTiO₃-PbZrO₃ system: A processing-property study

  Cornejo, I. A., Jadidian, B., Akdogan, E. K. & Safari, A., 1998, p. 337-340. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Lead titanate 100%
  • Dielectric properties 70%
  • Dissipation 62%
  • Dielectric Property 58%
  • Calcination 48%
  8 Scopus citations

• Fabrication of curved ceramic/polymer composite transducer for ultrasonic imaging applications by Fused Deposition of Ceramics

  Lous, G. M., Cornejo, I. A., McNulty, T. F., Safari, A. & Danforth, S. C., 1998, p. 239-242. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Ultrasonic imaging 100%
  • Transducers 60%
  • Ceramic 49%
  • Fabrication 47%
  • Polymers 46%
  5 Scopus citations

• Large-area flexible-array piezoelectric ceramic/polymer composite transducer for bone healing acceleration

  Cornejo, I. A., Jadidian, B., Winder, A. A. & Safari, A., 1998, p. 259-263. 5 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Piezoelectric ceramics 100%
  • Bone 70%
  • Transducers 68%
  • Flexibility 57%
  • Ceramic 55%
  7 Scopus citations

• Performance-based approach to the development of a recycled plastic/composite crosstie

  Nosker, T., Renfree, R., Lutz, M., Gillespie, B., Lampo, R., Van Ness, K. E. & Lynch, J., 1998, p. 2912-2915. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Plastics 100%
  • Composite materials 79%
  • Composite Material 68%
  • Mechanical properties 44%
  • Specifications 44%
  7 Scopus citations

• Performance of thin film carbon materials and carbon nanotubes as cold cathodes

  Amaratunga, G. A. J., Baxendale, M., Rupasinghe, N., Munindradasa, D. A. I. & Butler, T., 1998, p. 184-185. 2 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • cold cathodes 100%
  • carbon nanotubes 66%
  • carbon 51%
  • thin films 39%
  • performance 34%
  2 Scopus citations

• Processing and electromechanical properties of dome-shaped actuators fabricated by Fused Deposition of Ceramics

  Mohammadi, F., Kholkin, A., Danforth, S. C. & Safari, A., 1998, p. 273-276. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Domes 100%
  • Ceramic 65%
  • Actuators 64%
  • Binders 52%
  • D region 46%
  6 Scopus citations

• Properties of donor doped BaTi(Mn)O₃+SiO₂ sintered in reducing atmospheres

  Spang, D. I., Safari, A. & Burn, I., 1998, p. 525-528. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Dielectric properties 100%
  • Dielectric Property 82%
  • Donor 56%
  • Doping (additives) 45%
  • Doping Material 36%
• 1997

  Microstructure and phase separation of silica/poly(ethylene glycol) gels

  Beaudry, C. L. & Klein, L. C., 1997, p. 1910-1914. 5 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Polyethylene glycols 100%
  • Phase separation 99%
  • Gels 80%
  • Silica 79%
  • Phase Separation 67%
  3 Scopus citations
• 1996

  Comparison of the properties of (1-x)PMN-xPT ceramics near the morphotropic phase boundary prepared by sol-gel and columbite precursor methods

  Kelly, J., Farrey, G. & Safari, A., 1996, p. 699-702. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Phase boundaries 100%
  • Sol-gels 95%
  • Phase Interface 82%
  • Ceramic 55%
  • Chemical analysis 47%
  5 Scopus citations

• Crystallite and grain size effects in BaTiO₃

  Leonard, M. R. & Safari, A., 1996, p. 1003-1005. 3 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Crystallite size 100%
  • Size Effect 77%
  • Grain Size 63%
  • Crystallite 56%
  • Barium titanate 53%
  13 Scopus citations

• Crystallite size and microstrain studies in high purity submicron barium titanate powders

  Akdogan, E. K. & Safari, A., 1996, p. 1007-1010. 4 p.

  Rutgers, The State University

  Research output: Contribution to conference › Paper › peer-review

  • Barium titanate 100%
  • Crystallite size 92%
  • Crystallite 52%
  • Powders 50%
  • Purity 31%
  1 Scopus citations