If you made any changes in Pure, your changes will be visible here soon.

Research Output 1985 2017

Filter
Conference contribution
2016

Full 3d rotor/stator interaction simulations in aircraft engines with time-dependent angular speed

Batailly, A., Legrand, M. & Pierre, C., Jan 1 2016, Structures and Dynamics. American Society of Mechanical Engineers (ASME), Vol. 7A-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aircraft engines
Stators
Rotors
Deceleration
Coatings
2011
9 Citations (Scopus)

Influence of abradable coating wear mechanical properties on rotor stator interaction

Batailly, A., Legrand, M. & Pierre, C., Dec 1 2011, ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, GT2011. PARTS A AND B ed. Vol. 6. p. 941-950 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stators
Rotors
Wear of materials
Plastics
Coatings
2010

Evaluation of component mode synthesis methods for the detection of modal interaction through rotor stator contacts

Batailly, A., Legrand, M., Cartraud, P., Pierre, C. & Lombard, J. P., Jun 25 2010, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. PART B ed. Vol. 1. p. 863-871 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stators
Rotors
Lagrange multipliers
Computational efficiency
Equations of motion
3 Citations (Scopus)

Nonlinear modal analysis of mechanical systems with friction less contact interfaces

Laxalde, D., Legrand, M. & Pierre, C., Jun 25 2010, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. PART A ed. Vol. 1. p. 401-407 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nonlinear analysis
Modal analysis
Turbomachine blades
Industrial applications
Compressors
5 Citations (Scopus)

Numerical investigation of abradable coating wear through plastic constitutive law: Application to aircraft engines

Legrand, M. & Pierre, C., Jun 25 2010, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. PART B ed. p. 907-916 10 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009; vol. 1, no. PART B).

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aircraft engines
Constitutive Law
Blade
Numerical Investigation
Coating
2009
1 Citation (Scopus)

An efficient reduced order modeling technique for nonlinear vibration analysis of structures with intermittent contact

Saito, A., Castanier, M. P. & Pierre, C., Dec 1 2009, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 2009-2493

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vibration analysis
Cracks
Frequency response
Natural frequencies
Boundary conditions
1 Citation (Scopus)

Nonlinear modal analysis of mechanical systems with frictionless contact interfaces

Laxalde, D., Legrand, M. & Pierre, C., Dec 1 2009, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009. PARTS A AND B ed. p. 401-407 7 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 1, no. PARTS A AND B).

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Frictionless Contact
Modal Analysis
Nonlinear analysis
Modal analysis
Nonlinear Analysis
1 Citation (Scopus)

Resonance suppression in multi-DOF rotating flexible structures using order-tuned absorbers

Gozen, S., Olson, B. J., Shaw, S. W. & Pierre, C., Dec 1 2009, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009. PARTS A AND B ed. Vol. 1. p. 845-854 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flexible Structure
Flexible structures
Absorber
Rotating
Degree of freedom
2008
3 Citations (Scopus)

Development of beam-to-beam contact detection algorithms for rotor-stator rubbing applications

Roques, S., Legrand, M., Stoisser, C. M., Cartraud, P. & Pierre, C., Jun 13 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 1187-1194 8 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 1 PART B).

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rotor
Stators
Rotors
Contact
Bearings (structural)
5 Citations (Scopus)

Effects of a cracked blade on mistuned turbine engine rotor vibration

Saito, A., Castanier, M. P. & Pierre, C., Jun 13 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. Vol. 1 PART B. p. 1445-1456 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbine
Blade
Rotor
Turbomachine blades
ROM
7 Citations (Scopus)

Study of component mode synthesis methods in a rotor-stator interaction case

Batailly, A., Legrand, M., Cartraud, P., Pierre, C. & Lombard, J. P., Jun 13 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. Vol. 1 PART B. p. 1235-1242 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Component Mode Synthesis
Rotors (windings)
Rotor
Stators
Contact
2007
21 Citations (Scopus)

System identification of multistage turbine engine rotors

Song, S. H., Castanier, M. P. & Pierre, C., Sep 24 2007, Proceedings of the ASME Turbo Expo 2007 - Power for Land, Sea, and Air. Vol. 5. p. 569-582 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Identification (control systems)
Turbines
Rotors
Strain energy
2006
3 Citations (Scopus)

A component-based parametric reduced-order modeling technique and its application to probabilistic vibration analysis and design optimization

Park, K., Zhang, G., Castanler, M. P. & Pierre, C., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Design Engineering. American Society of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vibration analysis
Structural design
Uncertainty analysis
Pickups
Probability distributions

An efficient disk design optimization process for limiting mistuned blade vibration and stress levels in turbine engine rotors

Baik, S., Castanier, M. P. & Pierre, C., Dec 1 2006, Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-11. Vol. 2. p. 838-850 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbomachine blades
Turbines
Rotors
Computational efficiency
Airfoils

A novel hybrid method to predict the convergence history of aeroelastic calculations of mistuned/tuned bladed disks

He, Z., Epureanu, B. I. & Pierre, C., Nov 29 2006, Proceedings of 2006 ASME Pressure Vessels and Piping Division Conference - ASME PVP2006/ICPVT-11 Conference - Pressure Vessel Technologies for the Global Community. Vol. 2006.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aerodynamics

A novel hybrid method to predict the convergence history of aeroelastic calculations of mistuned/tuned bladed disks

He, Z., Epureanu, B. I. & Pierre, C., Dec 1 2006, Proceedings of the ASME Pressure Vessels and Piping Conference 2006. Vol. 9. p. 719-729 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aerodynamics
2 Citations (Scopus)

Component-mode-based Monte Carlo simulation for efficient probabilistic vibration analysis

Lee, S. Y., Castanier, M. P. & Pierre, C., Dec 1 2006, Collection of Technical Papers - 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference: 14th AIAA/ASME/AHS Adaptive Structures Conference, 8th AIAA Non-deterministic App. Vol. 7. p. 4832-4844 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vibration analysis
ROM
Modal analysis
Monte Carlo simulation
Statistics

Efficient nonlinear vibration analysis of the forced response of rotating cracked blades

Saito, A., Castanier, M. P. & Pierre, C., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Applied Mechanics Division. American Society of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vibration analysis
Cracks
Equations of motion
Finite element method
Nonlinear equations
3 Citations (Scopus)

Experimental Monte Carlo mistuning assessment of bladed disk vibration using forcing variations

Li, J., Castanier, M. P., Pierre, C. & Ceccio, S. L., Dec 1 2006, Collection of Technical Papers - 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference: 14th AIAA/ASME/AHS Adaptive Structures Conference, 8th AIAA Non-deterministic App. Vol. 7. p. 4540-4548 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbines
Rotors
Testing
Monte Carlo simulation

Order-Tuned and impact absorbers for rotating flexible structures

Shaw, S. W., Olson, B. J. & Pierre, C., Dec 1 2006, Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-11. Vol. 2. p. 612-621 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flexible structures
Tuning

Rotor-stator nodal diameter mode interaction by means of contact in an aircraft engine

Legrand, M., Idoux, L., Pierre, C. & Cartraud, P., Dec 1 2006, Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-11. Vol. 2. p. 602-611 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aircraft engines
Stators
Rotors
Jet engines
Lagrange multipliers
2005

Aircraft engine structural rotor-stator modal interaction

Legrand, M., Peseux, B., Roques, S. & Pierre, C., Dec 1 2005, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conferences - DETC2005: 20th Biennial Conf. on Mech. Vibration and Noise. Vol. 1 C. p. 2523-2532 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aircraft engines
Stators
Rotors
Jet engines
Lagrange multipliers
3 Citations (Scopus)

Disk design methodology for reducing blade vibration in turbine engine rotors

Baik, S., Castanier, M. P. & Pierre, C., Dec 1 2005, Proceedings of the ASME International Design Engineering Techn. Conferences and Computers and Information in Engineering Conferences - DETC2005: 20th Biennial Conf. on Mechanical Vibration and Noise. p. 1545-1555 11 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005; vol. 1 B).

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbomachine blades
Turbines
Rotors
Fatigue of materials
6 Citations (Scopus)

Effects of unsteady aerodynamics on the dynamic response of mistuned bladed disks

He, Z., Epureanu, B. I. & Pierre, C., Dec 1 2005, 3rd M.I.T. Conference on Computational Fluid and Solid Mechanics. p. 250-255 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamic Response
Aerodynamics
Dynamic response
Damping
Eigenvalue
20 Citations (Scopus)

Multi-stage modeling of turbine engine rotor vibration

Song, S. N., Castanier, M. P. & Pierre, C., Dec 1 2005, Proceedings of the ASME International Design Engineering Techn. Conferences and Computers and Information in Engineering Conferences - DETC2005: 20th Biennial Conf. on Mechanical Vibration and Noise. Vol. 1 B. p. 1533-1543 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbines
Rotors
Modal analysis
14 Citations (Scopus)

Order-tuned vibration absorbers for cyclic rotating flexible structures

Olson, B. J., Shaw, S. W. & Pierre, C., Dec 1 2005, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conferences - DETC2005: 20th Biennial Conf. on Mech. Vibration and Noise. Vol. 1 C. p. 2475-2484 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flexible structures
Equations of motion
Tuning
Engines
Defects
2004
11 Citations (Scopus)

Multi-domain multi-step topology optimization for vehicle structure crashworthiness design

Wang, H., Ma, Z. D., Kikuchi, N., Pierre, C. & Raju, B., Dec 1 2004, 2004 SAE World Congress.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crashworthiness
Shape optimization
Structural design
2003
8 Citations (Scopus)

A compact, generalized component mode mistuning representation for modeling bladed disk vibration

Lim, S. H., Bladh, R., Castanier, M. P. & Pierre, C., Dec 1 2003, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Component mode synthesis using nonlinear normal modes

Apiwattanalunggarn, P., Shaw, S. W. & Pierre, C., Dec 1 2003, Proceeding of the 2003 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Volume 5: 19th Biennial Conference on Mechanical Vibration and Noise. Vol. 5 B. p. 1155-1165 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Component Mode Synthesis
Normal Modes
Reduced Order Model
Dynamic models
Substructure

Correlation of tuned free vibration characteristics with mistuning sensitivity for a bladed disk

Hussein, M. I., Pierre, C. & Castanier, M. P., Dec 1 2003, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbomachinery
Turbomachine blades
Rotors
1 Citation (Scopus)

Design optimization of structural acoustic problems using FEM-BEM

Kim, N. H., Choi, K. K., Dong, J. & Pierre, C., Dec 1 2003, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Acoustics
Finite element method
Structural dynamics
Vibrations (mechanical)
Frequency response
5 Citations (Scopus)

Hybrid frequency-time domain methods for the analysis of complex structural systems with dry friction damping

Poudou, O. & Pierre, C., Dec 1 2003, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Damping
Friction
Nonlinear analysis
Turbomachinery
1 Citation (Scopus)

Mid-Frequency Vibration Analysis of Complex Structures: State of the Art and Future Directions

Castanier, M. P. & Pierre, C., Dec 1 2003, Proceedings of the Tenth International Congress on Sound and Vibration. Nilson, A. & Boden, H. (eds.). p. 1123-1130 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vibration analysis
1 Citation (Scopus)

Nonlinear normal modes for vibratory systems under periodic excitation

Jiang, D., Pierre, C. & Shaw, S. W., Dec 1 2003, Proceeding of the 2003 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Volume 5: 19th Biennial Conference on Mechanical Vibration and Noise. Vol. 5 B. p. 1177-1188 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Normal Modes
Excitation
Degree of freedom
Invariant Manifolds
Equations of motion
3 Citations (Scopus)

Statistical approximations of power flow for a vehicle structure with uncertainties

Lee, S. Y., Castanier, M. P. & Pierre, C., Dec 1 2003, Proceeding of the 2003 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Volume 5: 19th Biennial Conference on Mechanical Vibration and Noise. Vol. 5 B. p. 1305-1317 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Power Flow
Uncertainty
Approximation
Random variables
Reduced Order Model
2002
10 Citations (Scopus)

Multi-domain topology optimization for vehicle substructure design

Ma, Z. D., Kikuchi, N., Pierre, C. & Raju, B., Jan 1 2002, Design Engineering. American Society of Mechanical Engineers (ASME), p. 12-20 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shape optimization
Homogenization method
Functionally graded materials
Energy management
Computational efficiency
1 Citation (Scopus)

The construction of nonlinear normal modes for systems with internal resonance: Application to rotating beams

Jiang, D., Pierre, C. & Shaw, S. W., Jan 1 2002, Design Engineering. American Society of Mechanical Engineers (ASME), p. 445-456 12 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings).

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seed
Partial differential equations
Numerical methods
Dynamical systems
2001
3 Citations (Scopus)

Analysis of periodic frictional contact in finite elements problems

Nacivet, S., Pierre, C., Thouverez, F. & Jezequel, L., Dec 1 2001, Proceedings of the ASME Design Engineering Technical Conference. Vol. 6 C. p. 3049-3058 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Frictional Contact
Dry Friction
Friction
Finite Element
Frequency Domain
4 Citations (Scopus)

Effects of multi-stage coupling and disk flexibility on mistuned bladed disk dynamics

Bladh, R., Castanier, M. P. & Pierre, C., Jan 1 2001, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; IGTI Scholar Award. American Society of Mechanical Engineers (ASME), Vol. 4.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rotors
4 Citations (Scopus)

Reduced order modeling techniques for dynamic analysis of mistuned multi-stage turbomachinery rotors

Bladh, R., Castanier, M. P. & Pierre, C., Jan 1 2001, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; IGTI Scholar Award. American Society of Mechanical Engineers (ASME), Vol. 4.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbomachinery
Dynamic analysis
Rotors
Modal analysis
Engineers
2 Citations (Scopus)

Statistical approximations for characteristic-mode-based power flow analysis

Tan, Y. C., Castanier, M. P. & Pierre, C., Dec 1 2001, 19th AIAA Applied Aerodynamics Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polynomials
Interpolation
Vibration analysis
Galerkin methods
Demonstrations
2000
2 Citations (Scopus)

Characteristic-mode-based component mode synthesis for power flow analysis in complex structures

Tan, Y. C., Castanier, M. P. & Pierre, C., Dec 1 2000, 41st Structures, Structural Dynamics, and Materials Conference and Exhibit.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Armor
Stiffness matrix
Composite materials
9 Citations (Scopus)

Component-mode-based reduced order modeling techniques for mistuned bladed disks, part i: Theoretical models

Bladh, R., Castanier, M. P. & Pierre, C., Jan 1 2000, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education. American Society of Mechanical Engineers (ASME), Vol. 4.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modal analysis
6 Citations (Scopus)

Component-mode-based reduced order modeling techniques for mistuned bladed disks, part II: Application

Bladh, R., Castanier, M. P. & Pierre, C., Jan 1 2000, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education. American Society of Mechanical Engineers (ASME), Vol. 4.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modal analysis
Rotors
Dynamic analysis
Costs
4 Citations (Scopus)

Experimental investigation of mode localization and forced response amplitude magnification for a mistuned bladed disk

Judge, J., Pierre, C. & Mehmed, O., Jan 1 2000, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education. American Society of Mechanical Engineers (ASME), Vol. 4.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Phase control
Piezoelectric actuators
Dynamic response
Natural frequencies
Engines
1998
54 Citations (Scopus)

Investigation of the combined effects of intentional and random mistuning on the forced response of bladed disks

Castanier, M. P. & Pierre, C., Jan 1 1998, 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. American Institute of Aeronautics and Astronautics Inc, AIAA, A-98-3720

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rotors
Turbomachine blades
Stiffness
Statistics
1 Citation (Scopus)

Reduced Order Modeling and vibration analysis of mistuned bladed disk assemblies with shrouds

Bladh, R., Castanier, M. P. & Pierre, C., Jan 1 1998, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education. American Society of Mechanical Engineers (ASME), Vol. 5.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vibration analysis
Rotors
Turbomachinery
Turbomachine blades
Natural frequencies
1997
4 Citations (Scopus)

An experimental investigation of vibration localization in bladed disks, part I: Free response

Kruse, M. J. & Pierre, C., Jan 1 1997, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; IGTI Scholar Award. American Society of Mechanical Engineers (ASME), Vol. 4.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamic response
Experiments
Finite element method
2 Citations (Scopus)

An experimental investigation of vibration localization in bladed disks, Part II: Forced response

Kruse, M. J. & Pierre, C., Jan 1 1997, Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; IGTI Scholar Award. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 4).

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Piezoelectric actuators
Dynamic response
Tuning
Experiments
Engines
3 Citations (Scopus)

Statistical energy methods for mid-frequency vibration transmission analysis

Choi, S., Pierre, C. & Castanier, M. P., Dec 1 1997, SAE Technical Papers.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical methods
Uncertainty