If you made any changes in Pure, your changes will be visible here soon.

Research Output 1978 2019

Filter
Conference contribution
2019

Electrospun pullulan based nanofibers for medical applications

Bossart, A., Shady, S. & Kalyon, D., Jan 1 2019, Society for Biomaterials Annual Meeting and Exposition 2019: The Pinnacle of Biomaterials Innovation and Excellence - Transactions of the 42nd Annual Meeting. Society for Biomaterials, 1 p. (Transactions of the Annual Meeting of the Society for Biomaterials and the Annual International Biomaterials Symposium; vol. 40).

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aloe
Nanofibers
Ulcer
Extremities
Foot Ulcer
2012

Chemical engineering approaches to the design and fabrication of extrusion-based functionally graded scaffolds targeting tissue engineering applications

Kalyon, D., Dec 1 2012, AIChE 2012 - 2012 AIChE Annual Meeting, Conference Proceedings.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Squeeze flow rheometry

Kalyon, D., Gevgilili, H. & Tang, H., Dec 1 2012, AIChE 2012 - 2012 AIChE Annual Meeting, Conference Proceedings.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2010
1 Citation (Scopus)

Investigation of the properties of PEEK-nanotube composites prepared by solution methods

Bartolucci, S. F., Mago, G., Gevgilili, H., Vural, S., Dikovics, K., Kalyon, D. & Fisher, F., Jan 1 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. PART A ed. American Society of Mechanical Engineers (ASME), Vol. 12. p. 279-282 4 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polyether ether ketones
Carbon nanofibers
Nanotubes
Composite materials
Nanocomposites

Processing-induced crystallization of semicrystalline polymer nanocomposites

Mago, G., Kalyon, D. & Fisher, F., Dec 2 2010, SAMPE 2010 Conference and Exhibition "New Materials and Processes for a New Economy".

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crystallization
Nanocomposites
Polymers
Processing
Nanoparticles
2009

Imposition of the pressure-dependent wall slip condition in mathematical modeling of the continuous processing of energetic materials: Twin screw extrusion and die flows

Kalyon, D., Malik, M., Fair, M. & Fair, D., Dec 1 2009, Conference Proceedings - 2009 AIChE Annual Meeting, 09AIChE.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mathematical models of the coating of energetic grains upon diffusion of deterrents and experimental validation

Gevgilili, H., Kalyon, D., Senturk, S., Chiu, D. & Moy, S., Dec 1 2009, Conference Proceedings - 2009 AIChE Annual Meeting, 09AIChE.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mathematical models
Coatings
Inverse problems
Thermogravimetric analysis
Analytical models

Theoretical analyses of co-extrusion process for co-layered energetic extrudates and experimental investigations of co-extrusion

Prickett, S., Muscato, R., Gonzalez, C., Kalyon, D., Gevgilili, H. & Malik, M., Dec 1 2009, Conference Proceedings - 2009 AIChE Annual Meeting, 09AIChE.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Extrusion dies
Extruders
Extrusion
Mathematical models
Fluids
2008
2 Citations (Scopus)

Effect of uniaxial deformation, annealing and carbon nanotubes on the morphology and mechanical properties of poly (butylene terephthalate) and PBT nanocomposites

Mago, G., Dutreuil, J. A., Fisher, F. & Kalyon, D., May 30 2008, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, IMECE 2007. Vol. 11 PART B. p. 1127-1136 10 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon nanotubes
Nanocomposites
Crystallization
Annealing
Mechanical properties

Twin screw extrusion processing of a nanoalumina based formulation in conjunction with a molding powder preparation methodology

Patel, R., Redner, P., Kapoor, D., Fair, M., Bolognini, J., Gevgilili, H., Ergun, A., Vural, S., Malik, M. & Kalyon, D., Dec 1 2008, AIChE100 - 2008 AIChE Annual Meeting, Conference Proceedings.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Molding
Powders
Extrusion
Gels
Processing
2007

Effect of shearing on the crystallization behavior of poly (butylene terephthalate) and pbt nanocomposites

Mago, G., Fisher, F. & Kalyon, D., Dec 28 2007, Proceedings of the Materials Division, The ASME Non-Destructive Evaluation Division and The ASME Pressure Vessels and Piping Division, 2006. p. 497-506 10 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shearing
Nanocomposites
Crystallization
Carbon nanotubes
Polymers

Effect of uniaxial deformation, annealing and carbon nanotubes on the morphology and mechanical properties of poly (butylene terephthalate) and pbt nanocomposites

Mago, G., Dutreuil, J. A., Fisher, F. & Kalyon, D., Jan 1 2007, Micro and Nano Systems. American Society of Mechanical Engineers (ASME), Vol. 11. p. 1127-1135 9 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon nanotubes
Nanocomposites
Crystallization
Annealing
Mechanical properties
2006

Adjustable gap rheometry for the rheological characterization of energetic formulations

Kalyon, D., Gevgilili, H., Kowalczyk, J. E., Prickett, S. & Murphy, C., Dec 1 2006, 2006 AIChE Annual Meeting.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rheometers
Shear viscosity
Shear stress
Suspensions
Flow rate

Continuous shear roll milling of gun propellants

Kalyon, D. & Gevgilili, H., Dec 1 2006, 2006 AIChE Annual Meeting.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propellants
Granulation
Boundary conditions
Mathematical models
Processing

Effect of shearing on the crystallization behavior of poly (butylene terephthalate) and PBT nanocomposites

Mago, G., Fisher, F. & Kalyon, D., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Materials. American Society of Mechanical Engineers (ASME)

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shearing
Nanocomposites
Crystallization
Carbon nanotubes
Polymers

Processing of nanoenergetics with a fully-functional mini-twin screw extruder

Ozkan, S., Kalyon, D., Kowalczyk, J. E., Gevgilili, H., Mezger, M. & Demir, C., Dec 1 2006, 2006 AIChE Annual Meeting.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Extruders
Binders
Nanoparticles
Processing
Surface-Active Agents

Squeeze flow rheometry for rheological characterization of energetic formulations

Kalyon, D., Tang, H., Gevgilili, H., Demir, C. & Kowalczyk, J. E., Dec 1 2006, 2006 AIChE Annual Meeting.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shear viscosity
Rheometers
Quality control
Shear walls
Materials handling

Truly flexible manufacturing technologies for the processing of energetic formulations

Kowalczyk, J. E., Kalyon, D. & Gevgilili, H., Dec 1 2006, 2006 AIChE Annual Meeting.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pressurization
Conveying
Processing
Hardware
2005

Analysis of the fundamentals of co-extrusion process for co-extrusion of fast/slow burn composite grains

Gevgilili, H. & Kalyon, D., Dec 1 2005, 05AIChE: 2005 AIChE Annual Meeting and Fall Showcase, Conference Proceedings. 1 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Extrusion
Composite materials
Mathematical models
Shear viscosity
Velocity distribution

Development of a co-extrusion process for propellant manufacture

Gonzales, C., Muscato, R., Prickett, S., Cline, C., Kalyon, D., Malik, M. & Kowalczyk, J. E., Dec 1 2005, 05AIChE: 2005 AIChE Annual Meeting and Fall Showcase, Conference Proceedings. 1 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propellants
Extrusion

Development of flow instabilities during the extrusion of energetic materials: Mathematical analysis and experimental results

Kalyon, D., Tang, H. & Birinci, E., Dec 1 2005, 05AIChE: 2005 AIChE Annual Meeting and Fall Showcase, Conference Proceedings. 1 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Extrusion
Compressibility
Binders
Boundary conditions
Mathematical models

In-situ synthesis and processing of nano-hydroxyapetite in conjunction with poly(vinyl alcohol) and collagen based matrices and properties of the resulting composite

Degirmenbasi, N. & Kalyon, D., Dec 1 2005, 05AIChE: 2005 AIChE Annual Meeting and Fall Showcase, Conference Proceedings. 1 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Collagen
Alcohols
Hydroxyapatite
Composite materials
Processing

Mathematical modeling of the Co-rotating twin screw extrusion process and experimental studies

Malik, M. & Kalyon, D., Dec 1 2005, 05AIChE: 2005 AIChE Annual Meeting and Fall Showcase, Conference Proceedings. 1 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Extrusion
Heat transfer
Finite element method
Geometry
Extruders

Melt processing and rheological behavior of modified clay/polyolefin nanocomposites

Demirkol, E. A. & Kalyon, D., Dec 1 2005, 05AIChE: 2005 AIChE Annual Meeting and Fall Showcase, Conference Proceedings. 1 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polyolefins
Nanocomposites
Clay
Processing
Rheometers

Optimization of the selection of the extruder type, geometry and operating conditions for the processing of nano-energetic materials based fem analysis of the process

Malik, M., Kalyon, D. & Kowalczyk, J. E., Dec 1 2005, 05AIChE: 2005 AIChE Annual Meeting and Fall Showcase, Conference Proceedings. 1 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Extruders
Geometry
Processing
Extrusion
Mathematical models

Rheological characterization of Nc gels and development of processing simulants

Kalyon, D., Birinci, E. & Fair, D., Dec 1 2005, 05AIChE: 2005 AIChE Annual Meeting and Fall Showcase, Conference Proceedings. 1 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gels
Nitrocellulose
Processing
Testing

Twin screw extrusion processing of double base propellant

Prickett, S., Thomas, W. G., Radack, C. M., Kalyon, D., Malik, M. & Kowalczyk, J. E., Dec 1 2005, 05AIChE: 2005 AIChE Annual Meeting and Fall Showcase, Conference Proceedings. 1 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propellants
Extrusion
Rheometers
Processing
Infrared imaging
2004

Continuous processing of black powder

Jasinkiewicz, K. L., Dawag, T. E., Fair, M., King, R., Kalyon, D., Birinci, E. & Gevgilili, H., Dec 1 2004, 2004 AIChE Annual Meeting, Conference Proceedings. p. 3093-3147 55 p. 283c

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Powders
Extruders
Processing
Shear viscosity
Infrared imaging
2 Citations (Scopus)

Novel extrusion platforms for the continuous processing of energetics

Kowalczyk, J. E., Graybill, J. B., Malik, M., Kalyon, D., Gevgilili, H., Mezger, M. & Reddingius, B., Dec 1 2004, 2004 AIChE Annual Meeting, Conference Proceedings. p. 3041-3092 52 p. 283b

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Extrusion
Machinery
Processing
Extruders
Industry
2 Citations (Scopus)

Time-dependent development of flow instabilities of non-Newtonian melts and suspensions with rigid particles

Tang, H. S. & Kalyon, D., Dec 1 2004, 2004 AIChE Annual Meeting, Conference Proceedings. p. 3849-3885 37 p. 216f

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Capillary flow
Shear stress
Boundary conditions
2 Citations (Scopus)

Twin screw extrusion processing of double base rocket propellant

Prickett, S., Newton, W., Richman, S., Thomas, W., Gonzalez, C., Kalyon, D., Gevgilili, H., Malik, M., Kiryaman, T. & Kowalczyk, J. E., Dec 1 2004, 2004 AIChE Annual Meeting, Conference Proceedings. p. 3159-3186 28 p. 283e

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Propellants
Rockets
Extrusion
Extruders
Processing
1997
3 Citations (Scopus)

Adjustable gap in-line rheometer

Kalyon, D., Gokturk, H. & Boz, I., Jan 1 1997, Materials. Soc of Plastics Engineers, Vol. 2. p. 2283-2288 6 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rheometers
Gear pumps
Fluids
Shear viscosity
Pressure transducers
4 Citations (Scopus)

Analysis of degree of mixing in filled polymers by wide-angle x-ray diffraction

Yazici, R. & Kalyon, D., Jan 1 1997, Materials. Soc of Plastics Engineers, Vol. 2. p. 2076-2080 5 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Filled polymers
Diffraction
X rays
Polymers
Processing

Dissolution rates of oxetane thermoplastic elastomer for dissolution based recycling of elastomeric formulations

Cao, Z., Kovenklioglu, S., Yazici, R. & Kalyon, D., Jan 1 1997, Special Areas. Soc of Plastics Engineers, Vol. 3. p. 3104-3108 5 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

recycling
dissolution
solubility
activation energy
rate
2 Citations (Scopus)

Extensional flow of engineering plastics with glass fibers

Wagner, A. H., Kalyon, D., Yazici, R. & Fiske, T. J., Jan 1 1997, Processing. Soc of Plastics Engineers, Vol. 1. p. 996-1000 5 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rheometers
Fiber reinforced materials
Glass fibers
Image analysis
Distribution functions

Mathematical modeling and experimental studies of twin screw extrusion processing of filled polymers

Kalyon, D., Lawal, A., Yazici, R., Yaras, P. & Railkar, S., Dec 1 1997, Technical Papers, Regional Technical Conference - Society of Plastics Engineers. Anon (ed.). Soc Plast Eng, p. 188-234 47 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Filled polymers
Extrusion
Processing
Viscoplasticity
Extruders
1 Citation (Scopus)

Relative magnetic permeability of injection molded composites as affected from the flow induced orientation of ferromagnetic particles

Fiske, T., Gokturk, H. S., Yazici, R. & Kalyon, D., Jan 1 1997, Materials. Soc of Plastics Engineers, Vol. 2. p. 1482-1485 4 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnetic permeability
Fiber reinforced materials
Composite materials
Polyolefins
Molds
3 Citations (Scopus)

Viscoelasticity and processability of a BAMO/AMMO thermoplastic elastomer

Kucukpinar, R. E. & Kalyon, D., Jan 1 1997, Special Areas. Soc of Plastics Engineers, Vol. 3. p. 3411-3417 7 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermoplastic elastomers
Viscoelasticity
Constitutive equations
Shear viscosity
Molding
1996

Coupled simulation of die and extrusion flows using three-dimensional finite element method

Lawal, A., Railkar, S. & Kalyon, D., Dec 1 1996, Processing. Anon (ed.). Soc of Plastics Engineers, Vol. 1. p. 155-159 5 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Extrusion
Finite element method
Polymer melts
Extruders
Emulsions

Parison formation and inflation of polyamides in blow molding

Wegner, A. H. & Kalyon, D., Dec 1 1996, Processing. Anon (ed.). Soc of Plastics Engineers, Vol. 1. p. 953-957 5 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Blow molding
Polyamides
Resins
Gravitational effects
Swelling

Twin screw extrusion processing of filled polymers

Lawal, A., Railkar, S., Yaras, P. & Kalyon, D., Dec 1 1996, Processing. Anon (ed.). Soc of Plastics Engineers, Vol. 1. p. 381-385 5 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Filled polymers
Extrusion
Processing
Extruders
Finite element method
1995
8 Citations (Scopus)

Motion analysis of development of wall slip during die flow of concentrated suspensions

Kalyon, D., Gokturk, H., Yaras, P. & Aral, B. K., Jan 1 1995, Annual Technical Conference - ANTEC, Conference Proceedings. Soc of Plastics Engineers, Vol. 1. p. 1130-1134 5 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Suspensions
Air
Extrusion
Flow fields
Microscopes
1994
3 Citations (Scopus)

Extrudate swell behavior of engineering plastics reinforced with glass fibers

Yazici, R., Wagner, A., Kalyon, D. & Han, S. B., Jan 1 1994, Annual Technical Conference - ANTEC, Conference Proceedings. Anon (ed.). pt 1 ed. Publ by Soc of Plastics Engineers, p. 1172-1174 3 p.

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reinforced plastics
Glass fibers
Shear deformation
Fiber reinforced materials
Blow molding
1984

MICROSTRUCTURE AND ULTIMATE PROPERTIES OF EXTRUSION BLOW MOLDED POLYETHYLENE BOTTLES.

Kamal, M. R. & Kalyon, D., Dec 1 1984, Materials Science Monographs. Elsevier, p. 171-182 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Extrusion molding
Bottles
Blow molding
Molding
Extrusion