A finite element formulation for the dynamic analysis of machine components fabricated from composite materials

A. Semos; C. Chassapis

doi:10.1115/DETC1992-0223

A finite element formulation for the dynamic analysis of machine components fabricated from composite materials

A. Semos
, C. Chassapis

Department of Mechanical Engineering

Stevens Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

In this paper finite element procedures are presented for analyzing the elastic-dynamic behavior of mechanical components fabricated from fiber-reinforced composite materials. An arbitrarily laminated composite plate element is created which allows the analysis of components that are moving in three dimensional space. The five D.O.F. per node static model of S. C. Panda and R. Natarajan is used as a basis for the derivation derived ^of the ^dynamic from Hamilton ^model. ’s ^The Principle. ^elemental The ^equations formulation ^{of motion} considers ^are the total kinetic and strain energies of the moving element, together with the work due to bending, caused by the transversely acting external forces, as welt as that due to the foreshortening of the element, caused by axially applied loads.

Original language	English
Title of host publication	22nd Biennial Mechanisms Conference
Subtitle of host publication	Robotics, Spatial Mechanisms, and Mechanical Systems
Publisher	American Society of Mechanical Engineers (ASME)
Pages	259-267
Number of pages	9
ISBN (Electronic)	9780791809396
DOIs	https://doi.org/10.1115/DETC1992-0223
State	Published - 1992
Event	ASME 1992 Design Technical Conferences, DETC 1992 - Scottsdale, United States Duration: Sep 13 1992 → Sep 16 1992

Publication series

Name	Proceedings of the ASME Design Engineering Technical Conference
Volume	Part F168016-2

Conference

Conference	ASME 1992 Design Technical Conferences, DETC 1992
Country/Territory	United States
City	Scottsdale
Period	9/13/92 → 9/16/92

ASJC Scopus subject areas

Mechanical Engineering
Computer Graphics and Computer-Aided Design
Computer Science Applications
Modeling and Simulation

Access to Document

10.1115/DETC1992-0223

Cite this

Semos, A., & Chassapis, C. (1992). A finite element formulation for the dynamic analysis of machine components fabricated from composite materials. In 22nd Biennial Mechanisms Conference: Robotics, Spatial Mechanisms, and Mechanical Systems (pp. 259-267). (Proceedings of the ASME Design Engineering Technical Conference; Vol. Part F168016-2). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/DETC1992-0223

@inproceedings{0423a0e7fff0437ab6c3edbfc255e656,

title = "A finite element formulation for the dynamic analysis of machine components fabricated from composite materials",

abstract = "In this paper finite element procedures are presented for analyzing the elastic-dynamic behavior of mechanical components fabricated from fiber-reinforced composite materials. An arbitrarily laminated composite plate element is created which allows the analysis of components that are moving in three dimensional space. The five D.O.F. per node static model of S. C. Panda and R. Natarajan is used as a basis for the derivation derived of the dynamic from Hamilton model. {\textquoteright}s The Principle. elemental The equations formulation of motion considers are the total kinetic and strain energies of the moving element, together with the work due to bending, caused by the transversely acting external forces, as welt as that due to the foreshortening of the element, caused by axially applied loads.",

author = "A. Semos and C. Chassapis",

note = "Publisher Copyright: {\textcopyright} 1992 American Society of Mechanical Engineers (ASME). All rights reserved.; ASME 1992 Design Technical Conferences, DETC 1992 ; Conference date: 13-09-1992 Through 16-09-1992",

year = "1992",

doi = "10.1115/DETC1992-0223",

language = "English",

series = "Proceedings of the ASME Design Engineering Technical Conference",

publisher = "American Society of Mechanical Engineers (ASME)",

pages = "259--267",

booktitle = "22nd Biennial Mechanisms Conference",

}

Semos, A & Chassapis, C 1992, A finite element formulation for the dynamic analysis of machine components fabricated from composite materials. in 22nd Biennial Mechanisms Conference: Robotics, Spatial Mechanisms, and Mechanical Systems. Proceedings of the ASME Design Engineering Technical Conference, vol. Part F168016-2, American Society of Mechanical Engineers (ASME), pp. 259-267, ASME 1992 Design Technical Conferences, DETC 1992, Scottsdale, United States, 9/13/92. https://doi.org/10.1115/DETC1992-0223

A finite element formulation for the dynamic analysis of machine components fabricated from composite materials. / Semos, A.; Chassapis, C.
22nd Biennial Mechanisms Conference: Robotics, Spatial Mechanisms, and Mechanical Systems. American Society of Mechanical Engineers (ASME), 1992. p. 259-267 (Proceedings of the ASME Design Engineering Technical Conference; Vol. Part F168016-2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - A finite element formulation for the dynamic analysis of machine components fabricated from composite materials

AU - Semos, A.

AU - Chassapis, C.

PY - 1992

Y1 - 1992

N2 - In this paper finite element procedures are presented for analyzing the elastic-dynamic behavior of mechanical components fabricated from fiber-reinforced composite materials. An arbitrarily laminated composite plate element is created which allows the analysis of components that are moving in three dimensional space. The five D.O.F. per node static model of S. C. Panda and R. Natarajan is used as a basis for the derivation derived of the dynamic from Hamilton model. ’s The Principle. elemental The equations formulation of motion considers are the total kinetic and strain energies of the moving element, together with the work due to bending, caused by the transversely acting external forces, as welt as that due to the foreshortening of the element, caused by axially applied loads.

AB - In this paper finite element procedures are presented for analyzing the elastic-dynamic behavior of mechanical components fabricated from fiber-reinforced composite materials. An arbitrarily laminated composite plate element is created which allows the analysis of components that are moving in three dimensional space. The five D.O.F. per node static model of S. C. Panda and R. Natarajan is used as a basis for the derivation derived of the dynamic from Hamilton model. ’s The Principle. elemental The equations formulation of motion considers are the total kinetic and strain energies of the moving element, together with the work due to bending, caused by the transversely acting external forces, as welt as that due to the foreshortening of the element, caused by axially applied loads.

UR - https://www.scopus.com/pages/publications/85104194334

UR - https://www.scopus.com/pages/publications/85104194334#tab=citedBy

U2 - 10.1115/DETC1992-0223

DO - 10.1115/DETC1992-0223

M3 - Conference contribution

T3 - Proceedings of the ASME Design Engineering Technical Conference

SP - 259

EP - 267

BT - 22nd Biennial Mechanisms Conference

PB - American Society of Mechanical Engineers (ASME)

T2 - ASME 1992 Design Technical Conferences, DETC 1992

Y2 - 13 September 1992 through 16 September 1992

ER -

Semos A, Chassapis C. A finite element formulation for the dynamic analysis of machine components fabricated from composite materials. In 22nd Biennial Mechanisms Conference: Robotics, Spatial Mechanisms, and Mechanical Systems. American Society of Mechanical Engineers (ASME). 1992. p. 259-267. (Proceedings of the ASME Design Engineering Technical Conference). doi: 10.1115/DETC1992-0223

A finite element formulation for the dynamic analysis of machine components fabricated from composite materials

Abstract

Publication series

Conference

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this