Application of mineral iron and sulfide analysis to evaluate natural attenuation at fuel contaminated site

Lonnie G. Kennedy, Jess W. Everett, Thomas Dewers, William Pickins, David Edwards

Research output: Contribution to journalArticle

16 Scopus citations

Abstract

An investigation was conducted of the natural attenuation (bioremediation) potential in a gasoline-contaminated aquifer. In natural attenuation studies, certain oxidized electron acceptors used by bacteria and reduced respiratory products are measured to evaluate the bioremediation of an organic contaminant. Typically, only aqueous ions O2, NO3-, Fe2+, and SO42- are examined in investigations of this type; however, this study also considered mineral Fe and S species as sampled in five core holes along a longitudinal transect of the fuel plume. These samples were subjected to sequential extractions using 6 N HCl and 1 N Cr2+ to determine the mineral content of Fe2+, Fe3+, FeS, and FeS2. A 0.5 N HCl solution was used to estimate available Fe3+ and biogenically produced authigenic Fe2+ minerals. Bacteria largely deplete dissolved O2, NO3-, and SO42- in the most contaminated area of the plume. SO42- and Fe3+ reduction produce secondary authigenic minerals retained in the aquifer. Reduced sulfide minerals (~FeS and FeS2) were found near the core of the plume. Direct enzymatic reduction of Fe3+ minerals was inferred because most of the Fe2+ is not associated with iron sulfides. Expressed capacity is a measurement of past contaminant oxidation. A more accurate estimation of expressed capacity was possible when Fe and S minerals were evaluated along with aqueous data. By including mineral data it was shown that most of the hydrocarbon spill was naturally attenuated at this site. The spatial distribution of Fe mineral species suggests that the hydrocarbon plume is contracting in size. This technique may be used in support of intrinsic bioremediation as part of risk-based corrective action.

Original languageEnglish (US)
Pages (from-to)47-56
Number of pages10
JournalJournal of Environmental Engineering
Volume125
Issue number1
DOIs
StatePublished - Jan 1 1999

All Science Journal Classification (ASJC) codes

  • Environmental Science(all)
  • Environmental Engineering
  • Civil and Structural Engineering
  • Environmental Chemistry

Fingerprint Dive into the research topics of 'Application of mineral iron and sulfide analysis to evaluate natural attenuation at fuel contaminated site'. Together they form a unique fingerprint.

  • Cite this