Computer-aided design methodology for mold cooling

Research output: Contribution to conferencePaper

Abstract

A computer-aided design and analysis methodology based on thermal network modelling was developed for efficient simulation of heat transfer within the mold. To demonstrate its capabilities, the methodology was used for efficient thermal design of mold inserts. Parametric studies were performed to analyze the effect of thermal contact resistance, insert size, and the heat flux on the thermal behavior of the mold and the corresponding change in cooling time.

Original languageEnglish (US)
Pages702-706
Number of pages5
StatePublished - Jan 1 1995
EventProceedings of the 53rd Annual Technical Conference. Part 1 (of 3) - Boston, MA, USA
Duration: May 7 1995Oct 11 1995

Other

OtherProceedings of the 53rd Annual Technical Conference. Part 1 (of 3)
CityBoston, MA, USA
Period5/7/9510/11/95

Fingerprint

Computer aided design
Cooling
Computer aided analysis
Contact resistance
Heat flux
Heat transfer
Hot Temperature

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)
  • Polymers and Plastics

Cite this

Hadim, A., & Xu, K. (1995). Computer-aided design methodology for mold cooling. 702-706. Paper presented at Proceedings of the 53rd Annual Technical Conference. Part 1 (of 3), Boston, MA, USA, .
Hadim, Abdelhamid ; Xu, K. / Computer-aided design methodology for mold cooling. Paper presented at Proceedings of the 53rd Annual Technical Conference. Part 1 (of 3), Boston, MA, USA, .5 p.
@conference{bc4ab67dc09f44abbe1be0953d6edefb,
title = "Computer-aided design methodology for mold cooling",
abstract = "A computer-aided design and analysis methodology based on thermal network modelling was developed for efficient simulation of heat transfer within the mold. To demonstrate its capabilities, the methodology was used for efficient thermal design of mold inserts. Parametric studies were performed to analyze the effect of thermal contact resistance, insert size, and the heat flux on the thermal behavior of the mold and the corresponding change in cooling time.",
author = "Abdelhamid Hadim and K. Xu",
year = "1995",
month = "1",
day = "1",
language = "English (US)",
pages = "702--706",
note = "Proceedings of the 53rd Annual Technical Conference. Part 1 (of 3) ; Conference date: 07-05-1995 Through 11-10-1995",

}

Hadim, A & Xu, K 1995, 'Computer-aided design methodology for mold cooling' Paper presented at Proceedings of the 53rd Annual Technical Conference. Part 1 (of 3), Boston, MA, USA, 5/7/95 - 10/11/95, pp. 702-706.

Computer-aided design methodology for mold cooling. / Hadim, Abdelhamid; Xu, K.

1995. 702-706 Paper presented at Proceedings of the 53rd Annual Technical Conference. Part 1 (of 3), Boston, MA, USA, .

Research output: Contribution to conferencePaper

TY - CONF

T1 - Computer-aided design methodology for mold cooling

AU - Hadim, Abdelhamid

AU - Xu, K.

PY - 1995/1/1

Y1 - 1995/1/1

N2 - A computer-aided design and analysis methodology based on thermal network modelling was developed for efficient simulation of heat transfer within the mold. To demonstrate its capabilities, the methodology was used for efficient thermal design of mold inserts. Parametric studies were performed to analyze the effect of thermal contact resistance, insert size, and the heat flux on the thermal behavior of the mold and the corresponding change in cooling time.

AB - A computer-aided design and analysis methodology based on thermal network modelling was developed for efficient simulation of heat transfer within the mold. To demonstrate its capabilities, the methodology was used for efficient thermal design of mold inserts. Parametric studies were performed to analyze the effect of thermal contact resistance, insert size, and the heat flux on the thermal behavior of the mold and the corresponding change in cooling time.

UR - http://www.scopus.com/inward/record.url?scp=0029232170&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0029232170&partnerID=8YFLogxK

M3 - Paper

SP - 702

EP - 706

ER -

Hadim A, Xu K. Computer-aided design methodology for mold cooling. 1995. Paper presented at Proceedings of the 53rd Annual Technical Conference. Part 1 (of 3), Boston, MA, USA, .