Critical evaluation of state evolution laws in rate and state friction

Fitting large velocity steps in simulated fault gouge with time-, slip-, and stress-dependent constitutive laws

Pathikrit Bhattacharya, Allan Mattathias Rubin, Elsa Bayart, Heather M. Savage, Chris Marone

Research output: Contribution to journalArticle

29 Citations (Scopus)

Abstract

The variations in the response of different state evolution laws to large velocity increases can dramatically alter the style of earthquake nucleation in numerical simulations. But most velocity step friction experiments do not drive the sliding surface far enough above steady state to probe this relevant portion of the parameter space. We try to address this by fitting 1-3 orders of magnitude velocity step data on simulated gouge using the most widely used state evolution laws. We consider the Dieterich (Aging) and Ruina (Slip) formulations along with a stress-dependent state evolution law recently proposed by Nagata et al. (2012). Our inversions confirm the results from smaller velocity step tests that the Aging law cannot explain the observed response and that the Slip law produces much better fits to the data. The stress-dependent Nagata law can produce fits identical to, and sometimes slightly better than, those produced by the Slip law using a sufficiently large value of an additional free parameter c that controls the stress dependence of state evolution. A Monte Carlo search of the parameter space confirms analytical results that velocity step data that are well represented by the Slip law can only impose a lower bound on acceptable values of c and that this lower bound increases with the size of the velocity step being fit. We find that our 1-3 orders of magnitude velocity steps on synthetic gouge impose this lower bound on c to be 10-100, significantly larger than the value of 2 obtained by Nagata et al. (2012) based on experiments on initially bare rock surfaces with generally smaller departures from steady state. Key Points We fit friction data from 1-3 order velocity steps on simulated gouge Stress-dependent and Slip state evolution laws fit the data well The Slip law does it with one fewer parameter

Original languageEnglish (US)
Pages (from-to)6365-6385
Number of pages21
JournalJournal of Geophysical Research: Solid Earth
Volume120
Issue number9
DOIs
StatePublished - Sep 1 2015

Fingerprint

fault gouge
friction
slip
Friction
evaluation
Aging of materials
exercise test
rate
earthquakes
nucleation
sliding
Earthquakes
Nucleation
experiment
rocks
Experiments
Rocks
probe
earthquake
parameter

All Science Journal Classification (ASJC) codes

  • Geochemistry and Petrology
  • Geophysics
  • Earth and Planetary Sciences (miscellaneous)
  • Space and Planetary Science

Cite this

@article{7fe548e12d0c4bedaa60a6197eb8a7b5,
title = "Critical evaluation of state evolution laws in rate and state friction: Fitting large velocity steps in simulated fault gouge with time-, slip-, and stress-dependent constitutive laws",
abstract = "The variations in the response of different state evolution laws to large velocity increases can dramatically alter the style of earthquake nucleation in numerical simulations. But most velocity step friction experiments do not drive the sliding surface far enough above steady state to probe this relevant portion of the parameter space. We try to address this by fitting 1-3 orders of magnitude velocity step data on simulated gouge using the most widely used state evolution laws. We consider the Dieterich (Aging) and Ruina (Slip) formulations along with a stress-dependent state evolution law recently proposed by Nagata et al. (2012). Our inversions confirm the results from smaller velocity step tests that the Aging law cannot explain the observed response and that the Slip law produces much better fits to the data. The stress-dependent Nagata law can produce fits identical to, and sometimes slightly better than, those produced by the Slip law using a sufficiently large value of an additional free parameter c that controls the stress dependence of state evolution. A Monte Carlo search of the parameter space confirms analytical results that velocity step data that are well represented by the Slip law can only impose a lower bound on acceptable values of c and that this lower bound increases with the size of the velocity step being fit. We find that our 1-3 orders of magnitude velocity steps on synthetic gouge impose this lower bound on c to be 10-100, significantly larger than the value of 2 obtained by Nagata et al. (2012) based on experiments on initially bare rock surfaces with generally smaller departures from steady state. Key Points We fit friction data from 1-3 order velocity steps on simulated gouge Stress-dependent and Slip state evolution laws fit the data well The Slip law does it with one fewer parameter",
author = "Pathikrit Bhattacharya and Rubin, {Allan Mattathias} and Elsa Bayart and Savage, {Heather M.} and Chris Marone",
year = "2015",
month = "9",
day = "1",
doi = "https://doi.org/10.1002/2015JB012437",
language = "English (US)",
volume = "120",
pages = "6365--6385",
journal = "Journal of Geophysical Research: Solid Earth",
issn = "2169-9313",
publisher = "Wiley-Blackwell",
number = "9",

}

Critical evaluation of state evolution laws in rate and state friction : Fitting large velocity steps in simulated fault gouge with time-, slip-, and stress-dependent constitutive laws. / Bhattacharya, Pathikrit; Rubin, Allan Mattathias; Bayart, Elsa; Savage, Heather M.; Marone, Chris.

In: Journal of Geophysical Research: Solid Earth, Vol. 120, No. 9, 01.09.2015, p. 6365-6385.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Critical evaluation of state evolution laws in rate and state friction

T2 - Fitting large velocity steps in simulated fault gouge with time-, slip-, and stress-dependent constitutive laws

AU - Bhattacharya, Pathikrit

AU - Rubin, Allan Mattathias

AU - Bayart, Elsa

AU - Savage, Heather M.

AU - Marone, Chris

PY - 2015/9/1

Y1 - 2015/9/1

N2 - The variations in the response of different state evolution laws to large velocity increases can dramatically alter the style of earthquake nucleation in numerical simulations. But most velocity step friction experiments do not drive the sliding surface far enough above steady state to probe this relevant portion of the parameter space. We try to address this by fitting 1-3 orders of magnitude velocity step data on simulated gouge using the most widely used state evolution laws. We consider the Dieterich (Aging) and Ruina (Slip) formulations along with a stress-dependent state evolution law recently proposed by Nagata et al. (2012). Our inversions confirm the results from smaller velocity step tests that the Aging law cannot explain the observed response and that the Slip law produces much better fits to the data. The stress-dependent Nagata law can produce fits identical to, and sometimes slightly better than, those produced by the Slip law using a sufficiently large value of an additional free parameter c that controls the stress dependence of state evolution. A Monte Carlo search of the parameter space confirms analytical results that velocity step data that are well represented by the Slip law can only impose a lower bound on acceptable values of c and that this lower bound increases with the size of the velocity step being fit. We find that our 1-3 orders of magnitude velocity steps on synthetic gouge impose this lower bound on c to be 10-100, significantly larger than the value of 2 obtained by Nagata et al. (2012) based on experiments on initially bare rock surfaces with generally smaller departures from steady state. Key Points We fit friction data from 1-3 order velocity steps on simulated gouge Stress-dependent and Slip state evolution laws fit the data well The Slip law does it with one fewer parameter

AB - The variations in the response of different state evolution laws to large velocity increases can dramatically alter the style of earthquake nucleation in numerical simulations. But most velocity step friction experiments do not drive the sliding surface far enough above steady state to probe this relevant portion of the parameter space. We try to address this by fitting 1-3 orders of magnitude velocity step data on simulated gouge using the most widely used state evolution laws. We consider the Dieterich (Aging) and Ruina (Slip) formulations along with a stress-dependent state evolution law recently proposed by Nagata et al. (2012). Our inversions confirm the results from smaller velocity step tests that the Aging law cannot explain the observed response and that the Slip law produces much better fits to the data. The stress-dependent Nagata law can produce fits identical to, and sometimes slightly better than, those produced by the Slip law using a sufficiently large value of an additional free parameter c that controls the stress dependence of state evolution. A Monte Carlo search of the parameter space confirms analytical results that velocity step data that are well represented by the Slip law can only impose a lower bound on acceptable values of c and that this lower bound increases with the size of the velocity step being fit. We find that our 1-3 orders of magnitude velocity steps on synthetic gouge impose this lower bound on c to be 10-100, significantly larger than the value of 2 obtained by Nagata et al. (2012) based on experiments on initially bare rock surfaces with generally smaller departures from steady state. Key Points We fit friction data from 1-3 order velocity steps on simulated gouge Stress-dependent and Slip state evolution laws fit the data well The Slip law does it with one fewer parameter

UR - http://www.scopus.com/inward/record.url?scp=84945207597&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84945207597&partnerID=8YFLogxK

U2 - https://doi.org/10.1002/2015JB012437

DO - https://doi.org/10.1002/2015JB012437

M3 - Article

VL - 120

SP - 6365

EP - 6385

JO - Journal of Geophysical Research: Solid Earth

JF - Journal of Geophysical Research: Solid Earth

SN - 2169-9313

IS - 9

ER -