Experimental measurements and numerical modeling validation of temperature distribution in tissue medium during short pulse laser irradiation

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The objective of this paper is to analyze the temperature distributions and heat affected zone in skin tissue medium when irradiated with either a collimated or a focused laser beam from a short pulse laser source. Single-layer and three-layer tissue phantoms containing embedded inhomogeneities are used as a model of human skin tissue having subsurface tumor. Q-switched Nd:YAG laser is used in this study. Experimental measurements of axial and radial temperature distribution in the tissue phantom are compared with the numerical modeling results. For numerical modeling, the transient radiative transport equation is first solved using discrete ordinates method for obtaining the intensity distribution and radiative heat flux inside the tissue medium. Then the temperature distribution is obtained by coupling the bio-heat transfer equation with either hyperbolic non-Fourier or parabolic Fourier heat conduction model. The hyperbolic heat conduction equation is solved using MacCormack's scheme with error terms correction. It is observed that experimentally measured temperature distribution is in good agreement with that predicted by hyperbolic heat conduction model. The experimental measurements also demonstrate that converging laser beam focused directly at the subsurface location can produce desired high temperature at that location as compared to that produced by collimated laser beam for the same laser parameters.

Original languageAmerican English
Title of host publicationBiomedical and Biotechnology Engineering
PublisherAmerican Society of Mechanical Engineers (ASME)
Pages9-16
Number of pages8
ISBN (Electronic)0791842967
DOIs
StatePublished - 2007
EventASME 2007 International Mechanical Engineering Congress and Exposition, IMECE 2007 - Seattle, United States
Duration: Nov 11 2007Nov 15 2007

Publication series

NameASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
Volume2

Conference

ConferenceASME 2007 International Mechanical Engineering Congress and Exposition, IMECE 2007
Country/TerritoryUnited States
CitySeattle
Period11/11/0711/15/07

ASJC Scopus subject areas

  • Mechanical Engineering
  • General Engineering

Fingerprint

Dive into the research topics of 'Experimental measurements and numerical modeling validation of temperature distribution in tissue medium during short pulse laser irradiation'. Together they form a unique fingerprint.

Cite this