Resolution limitations in chemically amplified photoresist systems

TY - JOUR

T1 - Resolution limitations in chemically amplified photoresist systems

AU - Schmid, Gerard M.

AU - Stewart, Michael D.

AU - Wang, Chia Ying

AU - Vogt, Bryan D.

AU - Prabhu, Vivek M.

AU - Lin, Eric K.

AU - Willson, C. Grant

PY - 2004

Y1 - 2004

N2 - A variety of experimental evidence suggests that positive-tone chemically amplified photoresists have an intrinsic bias that might limit resolution during high-volume lithographic processing. If this is true, the implications for the semiconductor industry require careful consideration. The design concept of chemical amplification is based on generation of a chemically stable catalytic species in exposed regions of the photoresist film. The catalytic action of the photoproducts on the photoresist polymer causes a change in the dissolution rate in the irradiated regions of the film. Formation of a stable catalyst species is required for chemical amplification, but it has long been recognized that catalyst migration can produce a difference between the initial distribution of exposure energy and the final distribution of photoproducts. This difference, known as diffusion bias, depends on the photoresist chemistry and processing conditions. Diffusion bias is insensitive to exposure conditions, but it is possible to reduce catalyst migration through changes to resist formulation such as increasing the size of the catalyst molecule or processing conditions such as reducing the post exposure bake temperature. Another common approach to limiting diffusion bias is to incorporate base additives into the photoresist formulation to scavenge diffusing acid catalyst. All of these approaches to reducing catalyst migration generally reduce the catalytic efficiency of each photoproduct and therefore increase the total exposure dose required to pattern the film. Increases in required exposure dosage reduce the throughput of the exposure tools and can reduce the profitability of the manufacturing process. In this paper we present experimental results that are suggestive of an intrinsic photoresist bias. This diffusion bias sets a minimum resolution limit for chemically amplified resist systems that can be improved at the cost of reduced throughput and productivity.

AB - A variety of experimental evidence suggests that positive-tone chemically amplified photoresists have an intrinsic bias that might limit resolution during high-volume lithographic processing. If this is true, the implications for the semiconductor industry require careful consideration. The design concept of chemical amplification is based on generation of a chemically stable catalytic species in exposed regions of the photoresist film. The catalytic action of the photoproducts on the photoresist polymer causes a change in the dissolution rate in the irradiated regions of the film. Formation of a stable catalyst species is required for chemical amplification, but it has long been recognized that catalyst migration can produce a difference between the initial distribution of exposure energy and the final distribution of photoproducts. This difference, known as diffusion bias, depends on the photoresist chemistry and processing conditions. Diffusion bias is insensitive to exposure conditions, but it is possible to reduce catalyst migration through changes to resist formulation such as increasing the size of the catalyst molecule or processing conditions such as reducing the post exposure bake temperature. Another common approach to limiting diffusion bias is to incorporate base additives into the photoresist formulation to scavenge diffusing acid catalyst. All of these approaches to reducing catalyst migration generally reduce the catalytic efficiency of each photoproduct and therefore increase the total exposure dose required to pattern the film. Increases in required exposure dosage reduce the throughput of the exposure tools and can reduce the profitability of the manufacturing process. In this paper we present experimental results that are suggestive of an intrinsic photoresist bias. This diffusion bias sets a minimum resolution limit for chemically amplified resist systems that can be improved at the cost of reduced throughput and productivity.

KW - Chemically amplified photoresist

KW - Photolithography

KW - Resolution limit

UR - http://www.scopus.com/inward/record.url?scp=3843090432&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=3843090432&partnerID=8YFLogxK

U2 - 10.1117/12.536656

DO - 10.1117/12.536656

M3 - Conference article

SN - 0277-786X

VL - 5376

SP - 333

EP - 342

JO - Proceedings of SPIE - The International Society for Optical Engineering

JF - Proceedings of SPIE - The International Society for Optical Engineering

IS - PART 1

T2 - Advances in Resist Technology and Processing XXI

Y2 - 23 February 2004 through 24 February 2004

ER -